How To Connect Universal Remote To TV? – A Complete Guide

How to connect universal remote to tv? Have you ever misplaced your connect universal remote to tv? Unless you are a magician, the answer is almost certainly an emphatic yes. Everyone loses their remote controls, which is where universal remote controllers come in handy. These gadgets may be set up to operate with practically any TV, restoring the convenience you have lost. They are especially useful if you are buying a CRT. Don’t be intimidated by the prospect of programming a universal remote; it simply takes a few minutes and requires no technical knowledge.

How to Connect and Configure and Setup a Universal Remote to TV? – A Complete Guide

Direct coding input and automatic code search are the two most frequent methods for programming a universal remote. Ensure the remote has new batteries and the TV is turned on first before you commence. The encoding procedure can take numerous minutes, and you don’t want to be interrupted during that period. You’ll have to restart from the outset if the signal between both the TV and the remote is disrupted.

It’s also worth noting that not every universal remote employs the same coding skills. While this is a basic method for programming a remote, you should seek reference to the specific guidelines that came with the remote.

1) Something to Note Regarding Types of Remotes

Universal remote brands vary as some might have a series of buttons for particular types of equipment such as a DVR whereas others may have more specified buttons such as either TV, STR, or AUD. However, with universal remote coding, there is no particular specification for buttons to use as any device can be interconnected to any button. So, in case, you need to control your TV and there is no correlating button, you’d have to choose any button for your device.

2) Direct Code Entry for Programming a Universal Remote

The most preferred way for programming a universal remote is direct code entry. It relies on a pre-installed code list for certain devices; however, a similar list may be accessed online based on your remote’s brand. Look at the codes for your brand of TV if you have the documentation that came with your universal remote. Look for a code list online if you don’t have the documentation:

  1. To turn on the red light on your remote, press and hold the Setup button.
  2. To operate a TV, press the button on your remote that corresponds to the TV you are controlling. The red light will illuminate and remain illuminated.
  3. Enter the first of the four-digit codes indicated on your code list using the numbers on your remote. After you have input the final digit, the red light on your remote will turn off.
  4. After you have input the last digit, aim your remote at your TV and see if it operates the way you want it to. If it still doesn’t work, go through steps two through four again. After you have found a code that works for one device, repeat the steps above for each device you wish to operate with the remote.

Not all of the codes in the list will control every feature of your device. One code, for example, may turn a TV on and off as well as alter the station, but it will not regulate the volume. If you find a code that just controls a portion of your TV, keeps testing codes until you find one that works for all aspects of the TV – then write it down for preservation.

3) Using Auto Code Search to Configure a Universal Remote

Because it takes the minimum quantity of data from you, auto code search is perhaps the simplest programming approach. It looks through an underlying data repository and attempts code after code till it matches. The Philips Universal Remote, for instance, as previously indicated, employs auto code scan, and configuring it is as follows:

  1. Switch on the TV and sync the remote.
  2. Click the Set-up button on the remote till the red light turns on.
  3. On your remote, push a button which correlates to the TV you are attempting to configure. The red light will flicker once and then stay on.
  4. Push and discharge the Start button on the remote while pointing it towards your TV. The red light will flicker many times before remaining on as soon as the codes have been transmitted.
  5. Should your television switch off, switch it back on by pressing the start button on the set. If not, go through stages 4 and 5 again.
  6. Tap the Volume Up button on the remote while pointing it at the TV. The first 10 codes from step 4 will be sent again. If the television shuts off, you have discovered a code that runs the television. If not, try the other codes by pressing the Volume Up button 3 times in a row, with 3 seconds after every push. Duplicate this process until you’ve found the proper code.
  7. To switch your TV back on, click the Start button on the remote, then try the other buttons to ensure everything is working properly. Return to step 2 whenever a button does not work.

It is indeed important to keep in mind that auto code scan only works with devices that have a switch button. If your TV does not have any touch controls or unless they are damaged, you will have to rely on Direct Code Input.

How Do You Find Out Your TV Code?

The right TV code can be found in a variety of ways. One of the easiest ways is to read the manual that came with your TV. However, there are other options that you can try. The following are some of the ways that you can use to find out your TV code.

  1. Ensure that you read each device’s user guide carefully (TV, DVD, etc.) as well as the remote’s manual.
  2. It is possible to find a list of codes related to your device by searching online.
  3. There may be a list of codes found online that is not specific to a particular brand of television (which you should look for if the set is not branded).
  4. For the right code, you will need to contact the manufacturer of your device.

Here is the first step that needs to be taken. As a result, you will be provided with a list of codes that you can use. There may be cases where some of these TV codes will not work on your device, so please be aware of that.

May Also Like:


A Universal Remote is an excellent method to save up room on your wooden table, but bear in mind the following:

A universal remote isn’t necessarily a complete substitute for your old one. Some merely handle simple components, whereas others offer you avenues to sophisticated image, sound, network, Smart TV, and home control options. Nevertheless, users could still be required to use the original remote need to use the original remote for a few or all increased functionality, so keep it handy, along with some batteries.

It is not possible to update all Universal Remotes. Also, upon swapping the batteries, see whether the remote has a make-shift memory that saves coded information for a few minutes. Else, the remote may need to be reprogrammed. Take notice of what coding possibilities are available while purchasing a Universal Remote. For further information, consult your user handbook.